{tab Feature}

Overview

IPOC1KPT is Ethernet and power signal transmitter over single coaxial cable. The IPOC1KPT is used with IPOC1KR, which is an ideal solution for reconstruction of old projects without any change of existing coaxial cable. You needn’t change coax into network cable when you want to change analog cameras into IP cameras. Both of Ethernet and power transmission distance reach max up to 1000meters. The IPOC1KPT is able to provide power to POE cameras over network cable and it is able to provide power to NONE-POE cameras, too.
With high speed modern technology, the physical bandwidth is up to 100Mbps (bidirectional). The IPOC1KPT is built-in multi-stage surge and lightning protection protect video equipment against damaging voltage spikes and providenoise immunity to ensure quality signals without disturbing “hum-bars”.
The IPOC1KPT is widely applied to the fields such as network expanding system, network security system, network information distribution system, network upgrading & expanding system, railway and urban transportation, metallurgy and mining, field operations, etc.

 

Feature

Single Channel Ethernet and Power Receiver over Single Coaxial Cable

Support cascade mode; maximum four transmitters can be cascaded

Ethernet transmission distance reaches max up to 1000 meters

Power transmission distance reaches max up to 1000 meters with max 12W output power

Provide power to devices; max up to 12V/1A

Meet standards of EEE802.3 10BASE-T, IEEE802.3u 100BASE-TX

Support IEEE802.3af standard; automatically detect and recognize IEEE802.3af standard PD equipments and provide power to PD equipments

High speed modem technology, the physical bandwidth is up to 100Mbps (bidirectional)

Multi-stage strong surge and lightning protection design

Low power consumption, automatic error-correction coding technology

Easy to install, plug-and-play mode, fast network connection

 

{tab Specifications}

Technical Specifications

Model		IPOC1KPT
Product Name		Single Channel Ethernet and Power Transmitter over Single Coaxial Cable
Power Supply	Power	Output:12V DC/1A
	No-Load Power	1.5W(max)
RJ45 Interface	Ethernet Interface	RJ45 Interface
	Transmission Distance	100m (max) over cat5e/6
	Standards	IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE 802.3af
	Physical speed	100Mbps(bidirectional)
Coaxial Cable Interface	Coaxial Cable Interface	BNC connector
	Coaxial Cable Impedance	75Ohm
	Maximum Distance	1000m(SYV75-5 Cable)
Transmission Distance	Distance	Bandwidth
	300m	100Mbps
	500m	90Mbps
	800m	70Mbps
	1000m	55Mbps
LED Indicators	Green Light	Coaxial cable connecting indicator
	Red Light	Power indicator
Lightning Protection Grade	Network Port	Differential Mode:2KV Common Mode:4KV Executive Standard: IEC61000-4-5
	Device	contact discharge:3 grade air discharge: 3 grade Executive Standard: IEC61000-4-2
Mechanical	Dimensions(L*W*H)	103*54*26mm
	Housing	Aluminum
	Body Color	Black
	Weight	145g
Environmental	Operating Temperature	0~55?
	Storing Temperature	-25?~85?
	Relative Humidity	0~95% (non-condensing)

 

{tab Application}

Applications

Security Monitoring System

Multimedia Network Teaching System

Medical Monitoring Display System

Industrial Automation Control System

Banking, securities, financial information display system

Remote Network Server Monitoring

Department Store Security

Casino Security

Hospitals, Airports and banks

School Campuses

Application Diagram

{tab FAQ}

Q: What is the maximum units I can cascade the transmitter and receiver?

A: Due to the limitation of the bandwidth, it is suggested to use one Transmitter to one Receiver if all the Receivers are less than 5m apart, if the receivers can be 10m apart, 3x Transmitters + 1 x Receiver can be used, if all the receivers are located in different level/floor of the building, you can use as many as 10 pairs.

Q: What is the difference between the transmitter and receiver?

The transmitter is connected to the IP camera side, nopower supply required; the receiver is connected to Switch or NVR side, it requires the POE power.