Fluke 116 HVAC Multimeter with Temperature and Microamps
Designed by electricians. Engineered by Fluke.
Compact true-rms meter for HVAC (heating ventilation air conditioning) troubleshooting. The Fluke 116 was specifically designed for the HVAC professional. It has everything needed in an HVAC meter including temperature andmicroamp measurements to quickly troubleshoot problems with HVAC equipment and flame sensors.
- Built-in thermometer for HVAC applications
- Microamps to test flame sensors
- Low input impedance: helps prevent false readings due to ghost voltage
- Large white LED backlight to work in poorly lit areas
- Resistance, continuity, frequency and capacitance
- Min/Max/Average with elapsed time to record signal fluctuations
- Compact ergonomic design for one-handed operation
- Compatible with optional magnetic hanger (ToolPak™)
- CAT III 600 V safety rated
600 V |
6 kV peak per IEC 61010-1 600 V CAT III,Pollution Degree 2 |
Digital: | 6,000 counts, updates 4 per second |
33 segments, updates 32 per second |
-10 °C to + 50 °C |
-40 °C to + 60 °C |
9 volt Alkaline, NEDA 1604A/ IEC 6LR61 |
400 hours typical, without backlight |
Accuracy Specifications | |||||||||||||||||
DC millivolts |
|
||||||||||||||||
DC volts |
|
||||||||||||||||
Auto volts |
|
||||||||||||||||
AC millivolts1 true-rms |
|
||||||||||||||||
AC volts1 true-rms |
|
||||||||||||||||
Continuity |
|
||||||||||||||||
Ohms |
|
||||||||||||||||
Diode Test |
|
||||||||||||||||
Capacitance |
|
||||||||||||||||
LoZ capacitance |
|
||||||||||||||||
Temperature2 (Type-K thermocouple) |
|
||||||||||||||||
AC μamps true-rms (45 Hz to 500 Hz) |
|
||||||||||||||||
DC μamps |
|
||||||||||||||||
Hz (V or A input)2 |
|
Notes:
1) All ac voltage ranges exept Auto – V / Lo-Z are specified from 1% to 100% of range. Auto – V / Lo-Z is specified from 0.0V.
2) Frequency is ac coupled, 5 Hz to 50 kHz for ac voltage.
2) Frequency is ac coupled, 5Hz to 50 kHz for ac voltage
167 x 84 x 46 mm (6.57″ x 3.31″ x 1.82″) |
550 g |
3 years |