57125 50PK SNAPSKRU DRYWALL ANCHORS SELF DRILLING TOGGLER W/SCREW TOGGLER TOGGLER

Everyone loves self-drilling drywall anchors?you don’t need a drill to install them and they go in quickly and easily.

SnapSkru®anchors are the ones, however, that lock symmetrically on the wall and ceiling for truly secure fastening! Every time you tug on a toilet tissue holder or a towel bar or a window blind, the other self-drilling anchors come out as quickly as they wentin, because nothing prevents their sharp threads from cutting back through the drywall as the anchor is rocked in the wall.

When activated with a screw, the SnapSkru anchor opens with an audible “pop”, locking the anchor on the wall. The drywall gypsum and its paper arekept in compression and thereby immediately reinforced, providing much greater holding power than the other self-drilling anchors that are just a small screw in a large screw.

And the SnapSkru anchor’s built-in positive stop resists over-drilling! Try it for yourself!

Features

No drill needed for medium-duty secure anchoring in drywall walls or ceilings 3/8-in to 5/8-in thick. Holds up to 65 Lbs. in 1/2-in drywall with the #6 x 1-1/2-in screw included in the package. (Industry standards recommend 1/4 of this ultimate load per anchor.) locks on wall or ceiling to resist vibration and shock. Pop sound indicates correct installation. Strongest and safest self-drilling drywall anchor. Removable. Won’t destroy wall. Great for hanging bathroom accessories, kitchen accessories, window treatments(drapes, curtains, blinds and more.), lightweight shelving, pictures, mirrors and more. Made in the USA.

• Locks on walls and ceilings 3/8-in to 5/8-in for vibration-proof holding
• Great for hanging bath and kitchen accessories, lighting fixtures, shelving, mirrors and much more
• The SPM anchor holds up to 65 lbs and the SP anchor upto 79 lbs in 1/2-in drywall (Industry standards recommend 1/4 of this ultimate load per anchor)
• No pre-drilling necessary; installs easily with a #2 Phillips screw driver or screw gun
• Package contains 25 SPM mini, 25 #6 x 1-1/4-in screws and 25 SP regular, 25 #8 x 1-1/2-in screws

SP Regular Anchor

• NO drill needed!
• Lockson wallsandceilings?resists vibration & won’t destroy drywall
• Works with #6, #8 & #10 screws
• Built-in “positive stop” resists over-drilling
• When you hear the “pop”, you know the anchor is correctly installed

SPMMINIAnchor
Same benefits as Regular SnapSkru SP Anchor, plus:

• Stronger than many larger anchors
• Makes only a tiny 1/4″ hole
• Small 0.4″ head hides behind thefixture
• Head sits flush on wall
• Works with #6 & #8 screws

 

Holding Values

SnapSkru SP

Tested in	Ultimate Tensile (lbs)*	Ultimate Shear Load (lbs)*
3/8″ Drywall	57	108
1/2″ Drywall	79	149
5/8″ Drywall	135	178

SP anchor tested with #8 x 1-1/2″ screws.

SnapSkru SPM (MINISnapSkru)

Tested in	Ultimate Tensile (lbs)*	Ultimate Shear Load (lbs)*
3/8″ Drywall	57	105
1/2″ Drywall	65	131
5/8″ Drywall	95	175

SPMMINIanchor tested with #6 x 1-1/4″ screws.
*Industry safety standards recommend 1/4 of ultimate load.

 

Sub-Brand	SnapSkru
Type	Kit
Material	Nylon
Self-Drilling	Yes
Color/Finish Family	White
Manufacturer Color/Finish	White
Application Strength	Medium-duty
Use Location	Hollow wall
Package Quantity	50
Screws Included	Yes
Maximum Weight Capacity (lbs.)	178

Diameter Measurement	Assorted diameter
Length Measurement	Assorted length
For Use with Brick	No
For Use with Concrete Block	No
For Use with Plaster	No
For Use with Solid Concrete	No
For Use with Tile	No
For Use with Wood	No
For Use with Drywall	Yes

{tab Installation}

Step-By-Step

Press tip of SnapSkru anchor into drywall using #2 Phillips screwdriver or screw gun. Drive anchor clockwiseinto drywall until anchor stops flush with wall. Place item over anchor and insert screw. Tighten screw flush with item. Use screw with minimum thread length = thickness of item + 1-1/4″ (32mm). Maximum item thickness with 1-1/2″ long screw: 3/4″. For thicker items, use a longer screw.