Features
- It used 9.5 inches special tiny design.
- Two Channels Model ? 120W RMS/Per channel.
- Stereo into 4-8 Ohm loads.
- Bridged mode 240W output for 70V or 100V (Direct Drive)
- Power down after ~15 minutes of no signal and comply with Energy Star Power consumption limits of < 0.5W in standby.
- Red LED ( Front Panel) to indicated Standby mode is active.
- Terminal Block analog audio inputs.
- Selection for Power-Up mode.
- Switch for High Pass Filter.
- Natural cooling without Fan.
- TRIGGER could be external remoting ON/OFF.
- Short circuit protection.
- Overheating protection.
Specifications
- Stereo Mode (all channels driven)
- 120W x 2, 😯 (31 V) RMS output (steady state), per channel @ < 1 % THD+N
- 120W x 2, 4O (22 V) RMS output (steady state), per channel @ < 1 % THD+N
- Bridged Outputs For 70V/100V (Switch at “HIZ” position)
- 240W, 70V @ < 1 % THD+N
- 240W, 100V @ < 1 % THD+N
- Frequency Response 20 Hz – 20 kHz, +/- 2 dB @ 4O Load
- Signal to Noise >90dB @ 1W(20 Hz – 20 kHz)
- Input Sensitivity1.0V (+0dBu) @ Max Output 4O
- Gain Value ?25 dB @ 4O
- Input Impedance >10k, Balanced.
- Maximum Input Level 12.3 V (+24 dBu)
- Trigger In/Out DC 12V
- High Pass Filter 80 Hz(±2dB)
- Input Connector 5 pin Euro terminal
- Trigger Connectors 3.5 mm Jacks
- Output Connectors 4 pin Euro terminal (4O/8O)
- Dimensions 214mm(W) x 249.8mm(D) x 44mm(H)
- Net Weight 1.94 Kg
- Power Requirements 100 – 240 VAC, 50 – 60 Hz, 350W